Partner Products
6006PR
Pulser-receivers are used in material characterisation work measuring sound velocity or attenuation. Subsequently this can then be correlated to such material properties as elastic modulus or grain orientation.
Pulser-receivers can additionally be used to study frequency dependent material properties or to characterise the performance of ultrasonic transducers.
Advantages of Pulser Recievers include:
- Both the source impedance of pulser and the input impedance of receiver match to the 50-ohm coaxial cable to minimise signal reflection from the transducer
(Related Products: UT Transducers, Pragma)
Overview
Broadsound Pulser Receiver 6006 series are computer controlled ultrasonic pulser/receivers, which can be used in a variety of applications, such as the transducer characterisation, research and development of ultrasonic non-destructive testing, material characterisation, and biomedical research. The Windows-based control panel application and an application programming interface (API) are provided to enable development of custom software.
Download our brochure:
6006PR Plus (294.9KB)
Features
- 14 sets of unipolar pulses are available
- Fast pulse rise time and pulse fall time
- The bandwidth of each pulse is fully characterised
- Supporting acoustic transducers with centre frequency ranging from 0.5 MHz to 35 MHz
- Pulse echo mode or thru transmission mode
Specification
| Pulser | |
| Pulse type | Negative-going unipolar pulse |
|---|---|
| Pulse settings at a 50 Ω load | 1) -25 V, 0.1 μJ, DC–20 MHz 2) -45 V, 0.4 μJ, DC–30 MHz 3) -75 V, 1.0 μJ, DC–35 MHz 4) -120 V, 2.4 μJ, DC–45 MHz 5) -190 V, 5.0 μJ, DC–50 MHz 6) -190 V, 11 μJ, DC–25 MHz 7) -190 V, 15 μJ, DC–20 MHz 8) -190 V, 20 μJ, DC–15 MHz 9) -190 V, 25 μJ, DC–12 MHz 10) -190 V, 30 μJ, DC–10 MHz 11) -190 V, 35 μJ, DC–9 MHz 12) -190 V, 40 μJ, DC–8 MHz 13) -190 V, 45 μJ, DC–7 MHz 14) -190 V, 50 μJ, DC–6 MHz |
| Rise time | < 2ns |
| Fall Time | < 4ns Typ. (amplitude -190V) |
| Mode | Pulse echo (ECHO) or through transmission (THRU) |
| PRF (internal) | 100Hz, 200Hz, 500Hz 1kHz, 2kHz, 5kHz, 10kHz (10kHz is available for pulse energy < 40μJ) |
| PRF (external TTL) | 0kHz ~ 10kHz |
| Output impedance | 50Ω |
| Reciever | |
| Input range | ± 1V |
| Output range | ± 1V |
| Bandwidth | 0.6MHz ~ 40MHz |
| Gain | -28dB ~ +70dB |
| Noise | 25μVRMS / 191μVPP |
| Through Trans. Isolation | Typically 61dB at 10MHz |
| Input impedance | 50Ω |
| Output impedance | 50Ω |
| Waveform Digitizer | |
| Sampling frequency | 48MHz, 80MHz, and 240MHz |
| Resolution | 8bits |
| Input range | ± 1V |
| Memory size | 260kB |
| General Informtion | |
| Input / Output | T/R, R, RCVR Out, External Trigger In, Sync Out: BNC female connectors |
| Control Interface | USB 2.0 |
| Power Requirement | 100~240V AC, 50/60Hz |
| Dimensions | W 395mm x D 306mm x H 115mm |
| Weight | 5.5kg |