Bond Testing with the BondCheck

Multi-Mode Bond Testing.
Pitch-Catch, Resonance and MIA testing modes.

Multi-Mode Bond Testing.
Pitch-Catch, Resonance and MIA testing modes.

Multi-Mode Bond Testing.
Pitch-Catch, Resonance &
MIA testing modes.

previous arrow
next arrow
Slider
 

PFINDER 250
Black magnetic particle suspension

Oil based, ready to use.

PFINDER 250 is a ready-to-use-suspension of black magnetic particles in low-viscos carrier oil with special additives for magnetic particle testing. With PFINDER 250 surface defects of magnetizable materials can be indicated under daylight conditions.

PFINDER 250 has an optimized particle concentration and is therefore perfectly suitable for testing purposed on rough surfaces.
PFINDER 250 is suitable for testing at temperatures between 0°C and +50°C (temperature of work part).

   

PFINDER 251
Black magnetic particle suspension
Oil based, ready to use.

PFINDER 251 is a ready-to-use-suspension of black magnetic particles in low-viscos carrier oil with special additives for magnetic particle testing. With PFINDER 251 surface defects of magnetizable materials can be indicated under daylight conditions.

The particle concentration of PFINDER 251 meets the requirements of ASTM / AMS.
PFINDER 251 is suitable for testing at temperatures between 0°C and +50°C (temperature of work part).

   

PFINDER 240
Black magnetic particle suspension
Water based, Non-Hazardous 

PFINDER 240 is a water-based, ready-to-use suspension of black magnetic particles with special additives for magnetic particle testing. With PFINDER 240 surface defects of magnetizable materials can be detected at daylight.

The product is applicated by direct spraying on the surface to be tested.
PFINDER 240 is suitable for testing at temperatures between +5°C and +50°C (temperature of work part).

   

PFINDER 280
White contrast paint, q
uick-drying

PFINDER 280 is a quick-drying white contrast paint for magnetic particle testing. In combination with magnetic particles, e.g. magnetic particle suspension PFINDER 251 surface defects of magnetizable materials can be indicated under daylight conditions.

PFINDER 280 is suitable for testing at temperatures between 0°C and +50°C (temperature of work part).

   

PFINDER 890
Remover, based on acetone and isopropanol

PFINDER 890 is a special cleaner based on isopropanol / acetone for penetrant and magnetic particle testing. PFINDER 890 is used as precleaner for removal of oils and greases from the surface to be tested, as approved remover of PFINDER penetrants or as remover of PFINDER contrast paint.

PFINDER 890 is particulary suitable for general cleaning and removal of oils and greases. Material compatability (e.g. for plastics) has to be checked beforehand.

   

PFINDER 205
Black magnetic particle concentrate
Water based.

PFINDER 205 is a water-suspendible concentrate of black magnetic particles with special additives for magnetic particle testing. PFINDER 205 indicates surface defects of magnetizable materials under daylight conditions.

The concentrate PFINDER 205 has to be stirred in water. An even dispersion of the particles will be obtained very quickly.

For best results the use of white contrast paint (e.g. PFINDER 280) is recommended.