Bond Testing with the BondCheck

Multi-Mode Bond Testing.
Pitch-Catch, Resonance and MIA testing modes.

Multi-Mode Bond Testing.
Pitch-Catch, Resonance and MIA testing modes.

Multi-Mode Bond Testing.
Pitch-Catch, Resonance &
MIA testing modes.

previous arrow
next arrow
Slider
 

 

 

 PFINDER 800

Colour Contrast Red & Fourescent Type II+III / sensitivity level 2

PFINDER 800 is a hydrocarbon-free, directly water-washable and readily biodegradable colour contrast penetrant (red + fluorescent) for crack detection of surfaces.

Due to its removability PFINDER 800 provides a low residual background even on rough surfaces and therefore a user- friendly interpretability of the indications.

Ideal for penetrant testing at temperatures between -20°C to +100°C (temperature of work part) accoring to EN ISO 3452-5 and EN ISO 3452-6.

 
   

PFINDER 860

Colour Contrast Paint, Red, Type II/sensitivity level 2

PFINDER 860 is a directly water-washable colour contrast penetrant (red) for crack detection of surfaces. Due to its removability PFINDER 860 provides a low residual background even on rough surfaces and therefore a user-friendly interpretability of the indications.

PFINDER 860 is qualified for penetrant testing at temperatures between -20°C to +90°C (temperature of work part) accoring to EN ISO 3452-5 and EN ISO 3452-6.

 
   

PFINDER 871

Wet Developer, penetrant testing, solvent based.

PFINDER 871 is a solvent-based wet developer for penetrant testing. It is suitable for colour contrast and fluorescent penetrant testing; whislt being quick drying and can be easily wiped off from the surface or removed with water after testing.

PFINDER 871 is qualified for penetrant testing at temperatures between -20°C to +70°C (temperature of work part) according to EN ISO 3452-5 and EN ISO 3452-6.

 
   

PFINDER 890

Remover

PFINDER 890 is a special cleaner based on isopropanol /acetone for penetrant and magnetic particle testing. It can be used as a precleaner for removal of oils and greases from the surface to be tested, or as a approved remover of PFINDER penetrants or as a remover of PFINDER contrast paint.

PFINDER 890 is particulary suitable for general cleaning and removal of oils and greases. Material compatability (e.g. for plastics) should be be checked beforehand.

 
    PFINDER 895

Remover

PFINDER 895 is a special cleaner based on isopropanol for penetrant and magnetic particle testing. PFINDER 895 is used as precleaner for removal of oils and greases from the surface to be tested or as approved remover of PFINDER penetrants.

PFINDER 895 is particulary suitable for general cleaning and removal of oils and greases. Material compatability (e.g. for plastics) must be checked beforehand.

Remover method C according EN ISO 3452-1.